videoby PixVerseAvailable in Cinemagiq
PixVerse C1
Fast, low-cost image-to-video from 1 to 15 seconds
A 10-second clip costs from about $0.50
Fast, low-cost image-to-video from 1 to 15 seconds
A 10-second clip costs from about $0.50
PixVerse C1 is a video model from PixVerse. In Cinemagiq it is the quick, budget-friendly way to put a still in motion: add a first frame, describe what happens, and get a clip back fast. That makes it a strong pick for drafts, animatics and high-volume work where you want several options on the table before you commit to a final render.
PixVerse C1 needs a first frame and a prompt. There is no last frame and no reference images, and the clip follows the shape of the first frame. Length is flexible, from 1 to 15 seconds, and resolution runs from 360p through 540p and 720p up to 1080p. Audio is optional, so you can keep a draft silent or add sound in the same pass.
Use PixVerse C1 early in a project: turn key frames into moving animatics, test camera ideas, or make several takes of a beat and stack them on a shot in the Production Board, where a star marks the one you keep. Draft at 360p or 540p, then render the chosen take at 1080p. For a final shot that must end on a set frame, move to Kling O3 or Seedance 2.0.
Made in Cinemagiq with PixVerse C1. The exact prompt is under each one.
PromptThe cat waves happily at the camera, raindrops bounce off its backpack, a bus pulls up behind it.
First frame made with Nano Banana 2.1 in Cinemagiq.
PromptThe skateboarder lands the trick and rolls away from the camera into the golden light.
First frame made with GPT Image 2.5 Sunburst in Cinemagiq.
Straight from the model list Cinemagiq runs today.
| Variant | What drives the shot | Length | Resolution | Sound |
|---|---|---|---|---|
| PixVerse C1Fast and cheap, 360p to 1080p with optional audio | Prompt, first frame (required) | 1 to 15 s | 360p, 540p, 720p, 1080p | Optional |
PixVerse C1 is a video model from PixVerse. In Cinemagiq it is a fast, low-cost way to animate a first frame into a 1 to 15 second clip at 360p to 1080p, with optional audio.
Yes. PixVerse C1 always starts from a first frame and a prompt, and the clip follows the shape of that frame. Make the still in the Image tab, then add it as the First Frame under Add Keyframes in the Video tab.
Yes, audio is optional. Switch it on when the clip needs sound in the same pass, or leave it off and build the mix later with ElevenLabs Voiceover, Sound Effects and Music in the Audio tab of the Generation Studio.
Any length from 1 to 15 seconds. Short lengths are handy for quick motion tests, and the full 15 seconds covers most single shots in an animatic or a rough cut.
Generate with PixVerse C1 and the other models Cinemagiq runs in one AI-native workspace, and pick the right one per shot.