videoby ByteDanceAvailable in Cinemagiq
Seedance 2.0
Image-to-video with end frames, references and optional sound
A 10-second clip costs from about $1.00
Image-to-video with end frames, references and optional sound
A 10-second clip costs from about $1.00
Seedance 2.0 is a video model from ByteDance and the earlier generation of the Seedance family. Cinemagiq runs four versions: Seedance 2.0 and Seedance 2.0 Fast, which animate a starting image, and Seedance 2.0 References and Seedance 2.0 Fast References, which build the shot from reference material instead. The Fast versions answer with lower latency and cost, which suits drafts and quick iteration.
Seedance 2.0 and Seedance 2.0 Fast need a first frame, and you can add a last frame to set where the shot ends. The References versions skip frames and take up to 9 images, 3 videos and 3 audio clips. Clips run 4 to 15 seconds. Seedance 2.0 renders at 480p, 720p or 1080p, while the Fast versions stop at 720p. Sound is optional, and ratios range from 21:9 to 9:16 or adaptive.
Use Seedance 2.0 when the look is already locked in a still and you want it to move: make the frame in the Image tab, then animate it here. One prompt can hold several shots under Shot 1 and Shot 2 headings. Draft with Seedance 2.0 Fast, then rerun the keeper at 1080p on Seedance 2.0. For prompt-only shots or clips longer than 15 seconds, move up to Seedance 2.5.
Made in Cinemagiq with Seedance 2.0. The exact prompt is under each one.
PromptThe fox walks slowly forward through the snow, the lantern swaying and casting moving light, snowflakes falling, the camera tracks backward with it. Sound: crunching snow and soft wind.
First frame made with Nano Banana Pro in Cinemagiq.
PromptThe steam locomotive crosses the viaduct from left to right, thick smoke trailing, the camera slowly pans with it. Sound: steam whistle and chugging wheels.
First frame made with Seedream 5.0 Pro in Cinemagiq.
Straight from the model list Cinemagiq runs today.
| Variant | What drives the shot | Length | Resolution | Sound |
|---|---|---|---|---|
| Seedance 2.0Frames or references drive the shot, audio & end frame | Prompt, first frame (required), last frame | 4 to 15 s | 480p, 720p, 1080p | Optional |
| Seedance 2.0 ReferencesFrames or references drive the shot, audio & end frame | Up to 9 reference images, plus reference videos and audio | 4 to 15 s | 480p, 720p, 1080p | Optional |
| Seedance 2.0 FastFrames or references at lower latency & cost | Prompt, first frame (required), last frame | 4 to 15 s | 480p, 720p | Optional |
| Seedance 2.0 Fast ReferencesFrames or references at lower latency & cost | Up to 9 reference images, plus reference videos and audio | 4 to 15 s | 480p, 720p | Optional |
Seedance 2.0 is a video model from ByteDance that turns a starting image or a set of references into 4 to 15 second clips with optional sound. In Cinemagiq it comes as Seedance 2.0 and Seedance 2.0 Fast, each with a References version.
Yes, Seedance 2.0 and Seedance 2.0 Fast need a first frame. If you do not have one, use Seedance 2.0 References with up to 9 images, 3 videos and 3 audio clips, or make a still first in the Image tab of the Generation Studio.
Both take the same inputs, run 4 to 15 seconds and offer optional sound. Seedance 2.0 Fast responds with lower latency and cost and renders at 480p or 720p. Seedance 2.0 adds 1080p, so you can draft on Fast and finish the chosen take on the full model.
Open the Generation Studio, go to the Video tab and pick Seedance 2.0 in the AI Model picker. Add a First Frame under Add Keyframes, plus a Last Frame if you need one. Describe the motion, set length and resolution, then press Generate. The clip lands in the Asset Hub.
Generate with Seedance 2.0 and the other models Cinemagiq runs in one AI-native workspace, and pick the right one per shot.